TQ Software

• • • • • by TQSolutions • • • • •

  • Increase font size
  • Default font size
  • Decrease font size
Home Madge Tech Loggers

Madge Tech Loggers

E-mail Print PDF

TQ with Madge Tech Loggers

 

HiTemp150 Temperature RTD -40 to +150ºC

hitemp150

Used together with the TQTech validation software tools for calibration, calibration checking, programming, downloading, analysis and reporting, the HiTemp150 solution presents an extremely effective, accurate and cutting edge solution for a range of thermal validation applications.

HiTemp150  temperature data loggers  are rugged, submersible battery powered stand alone loggers for use with 21CFRpart11 compliant TQTech software…

Loggers can be quickly programmed by TQTech software in batches to automatically record up to 32,767 temperature measurements. The loggers have a 2 inch rigid external fast response probe. It can be used in harsh environments. It has a real time clock for time stamping all measurements and data is stored in non volatile solid state memory. The memory is protected in the event of a battery problem. TQTech enables quick and easy programming and downloading for large batches of up to 128 loggers.

 



HiTemp150FP Temperature RTD -40 to +150ºC with Flexible Probe

hitemp150fpThe HiTemp150 temperature data loggers can be supplied with a 24” (61cm) flexible silicone rubber enclosed cable with 4” (10.16cm) penetration style stainless steel probe and 316 stainless steel body.

 

 

 

 

 

 

 

 

 

IFC200 - USB Interface Cable

hitemp150 ifc200

The IFC200 is a USB interface package. It provides  a USB interface to the majority of MadgeTech data loggers without the need for a separate USB-Serial converter. The IFC200 communicates directly with TQTech software, eliminating the need for complicated virtual COM port setup. The IFC200 includes the interface cable with a 3.5mm audio jack cable, device drivers, and IFC200 quick installation guide.

 

 

Batch programming and downloading of MadgeTech Loggers

  • Connect multiple loggers to PC using multiple IFC200’s, limited by only USB expansion capability or number of IFC200’s available
  • Dramatically improves programming and download times
  • Calibrate or Check batches of loggers
  • Test Specifications automatically record serial numbers programmed for data acquisition, making life simpler
  • Reports are automatically generated, showing serial number used, calibration information for each logger
  • Logger usage can be automatically tracked, individual serial numbers can be programmed to alert for re-calibration on date, or time in use, or number of tests performed


madgetech_interface_window

 

 

 

 

 

 

 

 

HiTemp150 & HiTemp150FP SPECIFICATIONS

Temperature Sensor: 100? Platinum RTD
Range: -40 to +150ºC
Resolution: 0.05ºC
Accuracy: ±0.25ºC (100ºC to 150ºC)
Start Time: Software programmable start time and date.
Memory: 32,767 readings
Reading Interval: 1 reading per second to 1 every 12 hours
Calibration Date: Recorded within device
Power: 3.9V high-temperature lithium battery included
Battery Life: 1 year typical (1 minute reading rate at 25ºC)
Data Format: Date and time stamped ºC, ºF, K, ºR
Time Accuracy: ±1 minute/month at 20ºC (RS232 cable not in use)
Computer Interface: P C serial or USB (Interface cable required); 2,400 baud
Operating Environment: -40 to +150ºC, 0 to 100%RH
Approvals: CE


HITEMP150
Dimensions (Body): 1.1” x 1.75” dia. (28mm x 45mm dia.)
Dimensions (Probe): 2.0” x 3/16” dia. (51mm x 5mm dia.)
Material: 316 Stainless Steel
Weight: 8 oz (225 g)


HITEMP150FP
Dimensions (Body): 1.1” x 1.75” dia. (28mm x 45mm dia.)
Dimensions (Cable): 2.0’ x .14” dia. (60 mm x 4mm dia.)
Dimensions (Probe Handle): 1½” x 3/8” dia. (39mm x 10 mm dia.)
Dimensions (Probe): 4” x 1/8” dia. (102mm x 4mm dia.)
Material (Body & Probe): 316 stainless steel
Weight: 9 oz (227 g)